A.7. Using CVSup (Deprecated)

A.7.1. Introduction

Warning:

cvsup has been deprecated by the project, and its use is not recommended. Subversion should be used instead.

CVSup is a software package for distributing and updating source trees from a master CVS repository on a remote server host. The FreeBSD sources are maintained in a CVS repository on a central development machine in California. With CVSup, FreeBSD users can easily keep their own source trees up to date.

CVSup uses the so-called pull model of updating. Under the pull model, each client asks the server for updates, if and when they are wanted. The server waits passively for update requests from its clients. Thus all updates are instigated by the client. The server never sends unsolicited updates. Users must either run the CVSup client manually to get an update, or they must set up a cron job to run it automatically on a regular basis.

The term CVSup, capitalized just so, refers to the entire software package. Its main components are the client cvsup which runs on each user's machine, and the server cvsupd which runs at each of the FreeBSD mirror sites.

Note:

The csup utility is a rewrite of the CVSup software in C. Its biggest advantage is, that it is faster and does not depend on the Modula-3 language, thus you do not need to install it as a requirement. Moreover you can use it out-of-the-box, since it is included in the base system. If you decided to use csup, just skip the steps on the installation of CVSup and substitute the references of CVSup with csup while following the remainder of this article.

A.7.2. Installation

The easiest way to install CVSup is to use the precompiled net/cvsup package from the FreeBSD packages collection. If you prefer to build CVSup from source, you can use the net/cvsup port instead. But be forewarned: the net/cvsup port depends on the Modula-3 system, which takes a substantial amount of time and disk space to download and build.

Note:

If you are going to be using CVSup on a machine which will not have Xorg installed, such as a server, be sure to use the port which does not include the CVSup GUI, net/cvsup-without-gui.

A.7.3. CVSup Configuration

CVSup's operation is controlled by a configuration file called the supfile. There are some sample supfiles in the directory /usr/share/examples/cvsup/.

The information in a supfile answers the following questions for CVSup:

In the following sections, we will construct a typical supfile by answering each of these questions in turn. First, we describe the overall structure of a supfile.

A supfile is a text file. Comments begin with # and extend to the end of the line. Lines that are blank and lines that contain only comments are ignored.

Each remaining line describes a set of files that the user wishes to receive. The line begins with the name of a collection, a logical grouping of files defined by the server. The name of the collection tells the server which files you want. After the collection name come zero or more fields, separated by white space. These fields answer the questions listed above. There are two types of fields: flag fields and value fields. A flag field consists of a keyword standing alone, e.g., delete or compress. A value field also begins with a keyword, but the keyword is followed without intervening white space by = and a second word. For example, release=cvs is a value field.

A supfile typically specifies more than one collection to receive. One way to structure a supfile is to specify all of the relevant fields explicitly for each collection. However, that tends to make the supfile lines quite long, and it is inconvenient because most fields are the same for all of the collections in a supfile. CVSup provides a defaulting mechanism to avoid these problems. Lines beginning with the special pseudo-collection name *default can be used to set flags and values which will be used as defaults for the subsequent collections in the supfile. A default value can be overridden for an individual collection, by specifying a different value with the collection itself. Defaults can also be changed or augmented in mid-supfile by additional *default lines.

With this background, we will now proceed to construct a supfile for receiving and updating the main source tree of FreeBSD-CURRENT.

  • Which files do you want to receive?

    The files available via CVSup are organized into named groups called collections. The collections that are available are described in the following section. In this example, we wish to receive the entire main source tree for the FreeBSD system. There is a single large collection src-all which will give us all of that. As a first step toward constructing our supfile, we simply list the collections, one per line (in this case, only one line):

    src-all
  • Which version(s) of them do you want?

    With CVSup, you can receive virtually any version of the sources that ever existed. That is possible because the cvsupd server works directly from the CVS repository, which contains all of the versions. You specify which one of them you want using the tag= and date= value fields.

    Warning:

    Be very careful to specify any tag= fields correctly. Some tags are valid only for certain collections of files. If you specify an incorrect or misspelled tag, CVSup will delete files which you probably do not want deleted. In particular, use only tag=. for the ports-* collections.

    The tag= field names a symbolic tag in the repository. There are two kinds of tags, revision tags and branch tags. A revision tag refers to a specific revision. Its meaning stays the same from day to day. A branch tag, on the other hand, refers to the latest revision on a given line of development, at any given time. Because a branch tag does not refer to a specific revision, it may mean something different tomorrow than it means today.

    Section A.8, “CVS Tags” contains branch tags that users might be interested in. When specifying a tag in CVSup's configuration file, it must be preceded with tag= (RELENG_8 will become tag=RELENG_8). Keep in mind that only the tag=. is relevant for the Ports Collection.

    Warning:

    Be very careful to type the tag name exactly as shown. CVSup cannot distinguish between valid and invalid tags. If you misspell the tag, CVSup will behave as though you had specified a valid tag which happens to refer to no files at all. It will delete your existing sources in that case.

    When you specify a branch tag, you normally receive the latest versions of the files on that line of development. If you wish to receive some past version, you can do so by specifying a date with the date= value field. The cvsup(1) manual page explains how to do that.

    For our example, we wish to receive FreeBSD-CURRENT. We add this line at the beginning of our supfile:

    *default tag=.

    There is an important special case that comes into play if you specify neither a tag= field nor a date= field. In that case, you receive the actual RCS files directly from the server's CVS repository, rather than receiving a particular version. Developers generally prefer this mode of operation. By maintaining a copy of the repository itself on their systems, they gain the ability to browse the revision histories and examine past versions of files. This gain is achieved at a large cost in terms of disk space, however.

  • Where do you want to get them from?

    We use the host= field to tell cvsup where to obtain its updates. Any of the CVSup mirror sites will do, though you should try to select one that is close to you in cyberspace. In this example we will use a fictional FreeBSD distribution site, cvsup99.FreeBSD.org:

    *default host=cvsup99.FreeBSD.org

    You will need to change the host to one that actually exists before running CVSup. On any particular run of cvsup, you can override the host setting on the command line, with -h hostname.

  • Where do you want to put them on your own machine?

    The prefix= field tells cvsup where to put the files it receives. In this example, we will put the source files directly into our main source tree, /usr/src. The src directory is already implicit in the collections we have chosen to receive, so this is the correct specification:

    *default prefix=/usr
  • Where should cvsup maintain its status files?

    The CVSup client maintains certain status files in what is called the base directory. These files help CVSup to work more efficiently, by keeping track of which updates you have already received. We will use the standard base directory, /var/db:

    *default base=/var/db

    If your base directory does not already exist, now would be a good time to create it. The cvsup client will refuse to run if the base directory does not exist.

  • Miscellaneous supfile settings:

    There is one more line of boiler plate that normally needs to be present in the supfile:

    *default release=cvs delete use-rel-suffix compress

    release=cvs indicates that the server should get its information out of the main FreeBSD CVS repository. This is virtually always the case, but there are other possibilities which are beyond the scope of this discussion.

    delete gives CVSup permission to delete files. You should always specify this, so that CVSup can keep your source tree fully up-to-date. CVSup is careful to delete only those files for which it is responsible. Any extra files you happen to have will be left strictly alone.

    use-rel-suffix is ... arcane. If you really want to know about it, see the cvsup(1) manual page. Otherwise, just specify it and do not worry about it.

    compress enables the use of gzip-style compression on the communication channel. If your network link is T1 speed or faster, you probably should not use compression. Otherwise, it helps substantially.

  • Putting it all together:

    Here is the entire supfile for our example:

    *default tag=.
    *default host=cvsup99.FreeBSD.org
    *default prefix=/usr
    *default base=/var/db
    *default release=cvs delete use-rel-suffix compress
    
    src-all

A.7.3.1. The refuse File

As mentioned above, CVSup uses a pull method. Basically, this means that you connect to the CVSup server, and it says, Here is what you can download from me..., and your client responds OK, I will take this, this, this, and this. In the default configuration, the CVSup client will take every file associated with the collection and tag you chose in the configuration file. In order to download a partial tree, use the refuse file.

The refuse file tells CVSup that it should not take every single file from a collection; in other words, it tells the client to refuse certain files from the server. The refuse file can be found (or, if you do not yet have one, should be placed) in base/sup/. base is defined in your supfile; our defined base is /var/db, which means that by default the refuse file is /var/db/sup/refuse.

The refuse file has a very simple format; it simply contains the names of files or directories that you do not wish to download. For example:

bin/
usr.bin/

Users who are on slow links or pay by the minute for their Internet connection will be able to save time as they will no longer need to download files that they will never use. For more information on refuse files and other neat features of CVSup, please view its manual page.

A.7.4. Running CVSup

You are now ready to try an update. The command line for doing this is quite simple:

# cvsup supfile

where supfile is of course the name of the supfile you have just created. Assuming you are running under X11, cvsup will display a GUI window with some buttons to do the usual things. Press the go button, and watch it run.

Since you are updating your actual /usr/src tree in this example, you will need to run the program as root so that cvsup has the permissions it needs to update your files. Having just created your configuration file, and having never used this program before, that might understandably make you nervous. There is an easy way to do a trial run without touching your precious files. Just create an empty directory somewhere convenient, and name it as an extra argument on the command line:

# mkdir /var/tmp/dest
# cvsup supfile /var/tmp/dest

The directory you specify will be used as the destination directory for all file updates. CVSup will examine your usual files in /usr/src, but it will not modify or delete any of them. Any file updates will instead land in /var/tmp/dest/usr/src. CVSup will also leave its base directory status files untouched when run this way. The new versions of those files will be written into the specified directory. As long as you have read access to /usr/src, you do not even need to be root to perform this kind of trial run.

If you are not running X11 or if you just do not like GUIs, you should add a couple of options to the command line when you run cvsup:

# cvsup -g -L 2 supfile

The -g tells CVSup not to use its GUI. This is automatic if you are not running X11, but otherwise you have to specify it.

The -L 2 tells CVSup to print out the details of all the file updates it is doing. There are three levels of verbosity, from -L 0 to -L 2. The default is 0, which means total silence except for error messages.

There are plenty of other options available. For a brief list of them, type cvsup -H. For more detailed descriptions, see the manual page.

Once you are satisfied with the way updates are working, you can arrange for regular runs of CVSup using cron(8). Obviously, you should not let CVSup use its GUI when running it from cron(8).

A.7.5. CVSup File Collections

The file collections available via CVSup are organized hierarchically. There are a few large collections, and they are divided into smaller sub-collections. Receiving a large collection is equivalent to receiving each of its sub-collections. The hierarchical relationships among collections are reflected by the use of indentation in the list below.

The most commonly used collection is src-all.

cvs-all release=cvs

The main FreeBSD CVS repository, including the cryptography code.

distrib release=cvs

Files related to the distribution and mirroring of FreeBSD.

projects-all release=cvs

Sources for the FreeBSD projects repository.

src-all release=cvs

The main FreeBSD sources, including the cryptography code.

src-base release=cvs

Miscellaneous files at the top of /usr/src.

src-bin release=cvs

User utilities that may be needed in single-user mode (/usr/src/bin).

src-cddl release=cvs

Utilities and libraries covered by the CDDL license (/usr/src/cddl).

src-contrib release=cvs

Utilities and libraries from outside the FreeBSD project, used relatively unmodified (/usr/src/contrib).

src-crypto release=cvs

Cryptography utilities and libraries from outside the FreeBSD project, used relatively unmodified (/usr/src/crypto).

src-eBones release=cvs

Kerberos and DES (/usr/src/eBones). Not used in current releases of FreeBSD.

src-etc release=cvs

System configuration files (/usr/src/etc).

src-games release=cvs

Games (/usr/src/games).

src-gnu release=cvs

Utilities covered by the GNU Public License (/usr/src/gnu).

src-include release=cvs

Header files (/usr/src/include).

src-kerberos5 release=cvs

Kerberos5 security package (/usr/src/kerberos5).

src-kerberosIV release=cvs

KerberosIV security package (/usr/src/kerberosIV).

src-lib release=cvs

Libraries (/usr/src/lib).

src-libexec release=cvs

System programs normally executed by other programs (/usr/src/libexec).

src-release release=cvs

Files required to produce a FreeBSD release (/usr/src/release).

src-rescue release=cvs

Statically linked programs for emergency recovery; see rescue(8) (/usr/src/rescue).

src-sbin release=cvs

System utilities for single-user mode (/usr/src/sbin).

src-secure release=cvs

Cryptographic libraries and commands (/usr/src/secure).

src-share release=cvs

Files that can be shared across multiple systems (/usr/src/share).

src-sys release=cvs

The kernel (/usr/src/sys).

src-sys-crypto release=cvs

Kernel cryptography code (/usr/src/sys/crypto).

src-tools release=cvs

Various tools for the maintenance of FreeBSD (/usr/src/tools).

src-usrbin release=cvs

User utilities (/usr/src/usr.bin).

src-usrsbin release=cvs

System utilities (/usr/src/usr.sbin).

distrib release=self

The CVSup server's own configuration files. Used by CVSup mirror sites.

gnats release=current

The GNATS bug-tracking database.

mail-archive release=current

FreeBSD mailing list archive.

A.7.6. For More Information

For the CVSup FAQ and other information about CVSup, see The CVSup Home Page.

Most FreeBSD-related discussion of CVSup takes place on the FreeBSD technical discussions mailing list. New versions of the software are announced there, as well as on the FreeBSD announcements mailing list.

For questions or bug reports about CVSup take a look at the CVSup FAQ.

A.7.7. CVSup Sites

CVSup servers for FreeBSD are running at the following sites:

Central Servers, Primary Mirror Sites, Armenia, Australia, Brazil, Czech Republic, Denmark, Estonia, Finland, France, Germany, Ireland, Italy, Japan, Korea, Latvia, Lithuania, Netherlands, Norway, Poland, Russia, Slovak Republic, Slovenia, South Africa, Spain, Sweden, Switzerland, Taiwan, Ukraine, USA.

(as of UTC)

Central Servers
  • cvsup.FreeBSD.org

Primary Mirror Sites
  • cvsup1.FreeBSD.org

  • cvsup3.FreeBSD.org

  • cvsup4.FreeBSD.org

  • cvsup5.FreeBSD.org

  • cvsup6.FreeBSD.org

  • cvsup7.FreeBSD.org

  • cvsup9.FreeBSD.org

  • cvsup10.FreeBSD.org

  • cvsup11.FreeBSD.org

  • cvsup12.FreeBSD.org

  • cvsup14.FreeBSD.org

  • cvsup15.FreeBSD.org

  • cvsup18.FreeBSD.org

Armenia
  • cvsup1.am.FreeBSD.org

Australia
  • cvsup.au.FreeBSD.org

Brazil
  • cvsup2.br.FreeBSD.org

Czech Republic
  • cvsup.cz.FreeBSD.org

Denmark
  • cvsup.dk.FreeBSD.org

Estonia
  • cvsup.ee.FreeBSD.org

Finland
  • cvsup.fi.FreeBSD.org

France
  • cvsup3.fr.FreeBSD.org

  • cvsup5.fr.FreeBSD.org

  • cvsup8.fr.FreeBSD.org

Germany
  • cvsup.de.FreeBSD.org

  • cvsup2.de.FreeBSD.org

  • cvsup4.de.FreeBSD.org

  • cvsup5.de.FreeBSD.org

Ireland
  • cvsup.ie.FreeBSD.org

  • cvsup2.ie.FreeBSD.org

Italy
  • cvsup.it.FreeBSD.org

Japan
  • cvsup.jp.FreeBSD.org

  • cvsup2.jp.FreeBSD.org

  • cvsup3.jp.FreeBSD.org

  • cvsup4.jp.FreeBSD.org

  • cvsup5.jp.FreeBSD.org

  • cvsup6.jp.FreeBSD.org

Korea
  • cvsup.kr.FreeBSD.org

Latvia
  • cvsup.lv.FreeBSD.org

Lithuania
  • cvsup.lt.FreeBSD.org

Netherlands
  • cvsup.nl.FreeBSD.org

  • cvsup2.nl.FreeBSD.org

  • cvsup3.nl.FreeBSD.org

Norway
  • cvsup.no.FreeBSD.org

Poland
  • cvsup.pl.FreeBSD.org

Russia
  • cvsup3.ru.FreeBSD.org

  • cvsup5.ru.FreeBSD.org

  • cvsup6.ru.FreeBSD.org

Slovak Republic
  • cvsup.sk.FreeBSD.org

Slovenia
  • cvsup.si.FreeBSD.org

South Africa
  • cvsup.za.FreeBSD.org

Spain
  • cvsup.es.FreeBSD.org

  • cvsup2.es.FreeBSD.org

  • cvsup3.es.FreeBSD.org

Sweden
  • cvsup.se.FreeBSD.org

Switzerland
  • cvsup.ch.FreeBSD.org

Taiwan
  • cvsup.tw.FreeBSD.org

  • cvsup3.tw.FreeBSD.org

  • cvsup6.tw.FreeBSD.org

  • cvsup10.tw.FreeBSD.org

  • cvsup11.tw.FreeBSD.org

  • cvsup12.tw.FreeBSD.org

  • cvsup13.tw.FreeBSD.org

Ukraine
  • cvsup5.ua.FreeBSD.org

  • cvsup6.ua.FreeBSD.org

USA
  • cvsup1.us.FreeBSD.org

  • cvsup3.us.FreeBSD.org

  • cvsup4.us.FreeBSD.org

  • cvsup5.us.FreeBSD.org

  • cvsup7.us.FreeBSD.org

  • cvsup9.us.FreeBSD.org

  • cvsup11.us.FreeBSD.org

  • cvsup12.us.FreeBSD.org

  • cvsup13.us.FreeBSD.org

  • cvsup14.us.FreeBSD.org

  • cvsup15.us.FreeBSD.org

  • cvsup18.us.FreeBSD.org

All FreeBSD documents are available for download at http://ftp.FreeBSD.org/pub/FreeBSD/doc/

Questions that are not answered by the documentation may be sent to <freebsd-questions@FreeBSD.org>.
Send questions about this document to <freebsd-doc@FreeBSD.org>.